Initial commit.

1 files changed, 545 insertions, 0 deletions

diff --git a/src/contrib/SDL-2.30.2/include/SDL_mutex.h b/src/contrib/SDL-2.30.2/include/SDL_mutex.h
new file mode 100644
index 0000000..eaa21f2
--- /dev/null
+++ b/src/contrib/SDL-2.30.2/include/SDL_mutex.h
@@ -0,0 +1,545 @@
+/*
+  Simple DirectMedia Layer
+  Copyright (C) 1997-2024 Sam Lantinga <slouken@libsdl.org>
+
+  This software is provided 'as-is', without any express or implied
+  warranty.  In no event will the authors be held liable for any damages
+  arising from the use of this software.
+
+  Permission is granted to anyone to use this software for any purpose,
+  including commercial applications, and to alter it and redistribute it
+  freely, subject to the following restrictions:
+
+  1. The origin of this software must not be misrepresented; you must not
+     claim that you wrote the original software. If you use this software
+     in a product, an acknowledgment in the product documentation would be
+     appreciated but is not required.
+  2. Altered source versions must be plainly marked as such, and must not be
+     misrepresented as being the original software.
+  3. This notice may not be removed or altered from any source distribution.
+*/
+
+#ifndef SDL_mutex_h_
+#define SDL_mutex_h_
+
+/**
+ *  \file SDL_mutex.h
+ *
+ *  Functions to provide thread synchronization primitives.
+ */
+
+#include "SDL_stdinc.h"
+#include "SDL_error.h"
+
+/******************************************************************************/
+/* Enable thread safety attributes only with clang.
+ * The attributes can be safely erased when compiling with other compilers.
+ */
+#if defined(SDL_THREAD_SAFETY_ANALYSIS) && \
+    defined(__clang__) && (!defined(SWIG))
+#define SDL_THREAD_ANNOTATION_ATTRIBUTE__(x)   __attribute__((x))
+#else
+#define SDL_THREAD_ANNOTATION_ATTRIBUTE__(x)   /* no-op */
+#endif
+
+#define SDL_CAPABILITY(x) \
+  SDL_THREAD_ANNOTATION_ATTRIBUTE__(capability(x))
+
+#define SDL_SCOPED_CAPABILITY \
+  SDL_THREAD_ANNOTATION_ATTRIBUTE__(scoped_lockable)
+
+#define SDL_GUARDED_BY(x) \
+  SDL_THREAD_ANNOTATION_ATTRIBUTE__(guarded_by(x))
+
+#define SDL_PT_GUARDED_BY(x) \
+  SDL_THREAD_ANNOTATION_ATTRIBUTE__(pt_guarded_by(x))
+
+#define SDL_ACQUIRED_BEFORE(x) \
+  SDL_THREAD_ANNOTATION_ATTRIBUTE__(acquired_before(x))
+
+#define SDL_ACQUIRED_AFTER(x) \
+  SDL_THREAD_ANNOTATION_ATTRIBUTE__(acquired_after(x))
+
+#define SDL_REQUIRES(x) \
+  SDL_THREAD_ANNOTATION_ATTRIBUTE__(requires_capability(x))
+
+#define SDL_REQUIRES_SHARED(x) \
+  SDL_THREAD_ANNOTATION_ATTRIBUTE__(requires_shared_capability(x))
+
+#define SDL_ACQUIRE(x) \
+  SDL_THREAD_ANNOTATION_ATTRIBUTE__(acquire_capability(x))
+
+#define SDL_ACQUIRE_SHARED(x) \
+  SDL_THREAD_ANNOTATION_ATTRIBUTE__(acquire_shared_capability(x))
+
+#define SDL_RELEASE(x) \
+  SDL_THREAD_ANNOTATION_ATTRIBUTE__(release_capability(x))
+
+#define SDL_RELEASE_SHARED(x) \
+  SDL_THREAD_ANNOTATION_ATTRIBUTE__(release_shared_capability(x))
+
+#define SDL_RELEASE_GENERIC(x) \
+  SDL_THREAD_ANNOTATION_ATTRIBUTE__(release_generic_capability(x))
+
+#define SDL_TRY_ACQUIRE(x, y) \
+  SDL_THREAD_ANNOTATION_ATTRIBUTE__(try_acquire_capability(x, y))
+
+#define SDL_TRY_ACQUIRE_SHARED(x, y) \
+  SDL_THREAD_ANNOTATION_ATTRIBUTE__(try_acquire_shared_capability(x, y))
+
+#define SDL_EXCLUDES(x) \
+  SDL_THREAD_ANNOTATION_ATTRIBUTE__(locks_excluded(x))
+
+#define SDL_ASSERT_CAPABILITY(x) \
+  SDL_THREAD_ANNOTATION_ATTRIBUTE__(assert_capability(x))
+
+#define SDL_ASSERT_SHARED_CAPABILITY(x) \
+  SDL_THREAD_ANNOTATION_ATTRIBUTE__(assert_shared_capability(x))
+
+#define SDL_RETURN_CAPABILITY(x) \
+  SDL_THREAD_ANNOTATION_ATTRIBUTE__(lock_returned(x))
+
+#define SDL_NO_THREAD_SAFETY_ANALYSIS \
+  SDL_THREAD_ANNOTATION_ATTRIBUTE__(no_thread_safety_analysis)
+
+/******************************************************************************/
+
+
+#include "begin_code.h"
+/* Set up for C function definitions, even when using C++ */
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ *  Synchronization functions which can time out return this value
+ *  if they time out.
+ */
+#define SDL_MUTEX_TIMEDOUT  1
+
+/**
+ *  This is the timeout value which corresponds to never time out.
+ */
+#define SDL_MUTEX_MAXWAIT   (~(Uint32)0)
+
+
+/**
+ *  \name Mutex functions
+ */
+/* @{ */
+
+/* The SDL mutex structure, defined in SDL_sysmutex.c */
+struct SDL_mutex;
+typedef struct SDL_mutex SDL_mutex;
+
+/**
+ * Create a new mutex.
+ *
+ * All newly-created mutexes begin in the _unlocked_ state.
+ *
+ * Calls to SDL_LockMutex() will not return while the mutex is locked by
+ * another thread. See SDL_TryLockMutex() to attempt to lock without blocking.
+ *
+ * SDL mutexes are reentrant.
+ *
+ * \returns the initialized and unlocked mutex or NULL on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_DestroyMutex
+ * \sa SDL_LockMutex
+ * \sa SDL_TryLockMutex
+ * \sa SDL_UnlockMutex
+ */
+extern DECLSPEC SDL_mutex *SDLCALL SDL_CreateMutex(void);
+
+/**
+ * Lock the mutex.
+ *
+ * This will block until the mutex is available, which is to say it is in the
+ * unlocked state and the OS has chosen the caller as the next thread to lock
+ * it. Of all threads waiting to lock the mutex, only one may do so at a time.
+ *
+ * It is legal for the owning thread to lock an already-locked mutex. It must
+ * unlock it the same number of times before it is actually made available for
+ * other threads in the system (this is known as a "recursive mutex").
+ *
+ * \param mutex the mutex to lock
+ * \return 0, or -1 on error.
+ *
+ * \since This function is available since SDL 2.0.0.
+ */
+extern DECLSPEC int SDLCALL SDL_LockMutex(SDL_mutex * mutex) SDL_ACQUIRE(mutex);
+#define SDL_mutexP(m)   SDL_LockMutex(m)
+
+/**
+ * Try to lock a mutex without blocking.
+ *
+ * This works just like SDL_LockMutex(), but if the mutex is not available,
+ * this function returns `SDL_MUTEX_TIMEOUT` immediately.
+ *
+ * This technique is useful if you need exclusive access to a resource but
+ * don't want to wait for it, and will return to it to try again later.
+ *
+ * \param mutex the mutex to try to lock
+ * \returns 0, `SDL_MUTEX_TIMEDOUT`, or -1 on error; call SDL_GetError() for
+ *          more information.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_CreateMutex
+ * \sa SDL_DestroyMutex
+ * \sa SDL_LockMutex
+ * \sa SDL_UnlockMutex
+ */
+extern DECLSPEC int SDLCALL SDL_TryLockMutex(SDL_mutex * mutex) SDL_TRY_ACQUIRE(0, mutex);
+
+/**
+ * Unlock the mutex.
+ *
+ * It is legal for the owning thread to lock an already-locked mutex. It must
+ * unlock it the same number of times before it is actually made available for
+ * other threads in the system (this is known as a "recursive mutex").
+ *
+ * It is an error to unlock a mutex that has not been locked by the current
+ * thread, and doing so results in undefined behavior.
+ *
+ * It is also an error to unlock a mutex that isn't locked at all.
+ *
+ * \param mutex the mutex to unlock.
+ * \returns 0, or -1 on error.
+ *
+ * \since This function is available since SDL 2.0.0.
+ */
+extern DECLSPEC int SDLCALL SDL_UnlockMutex(SDL_mutex * mutex) SDL_RELEASE(mutex);
+#define SDL_mutexV(m)   SDL_UnlockMutex(m)
+
+/**
+ * Destroy a mutex created with SDL_CreateMutex().
+ *
+ * This function must be called on any mutex that is no longer needed. Failure
+ * to destroy a mutex will result in a system memory or resource leak. While
+ * it is safe to destroy a mutex that is _unlocked_, it is not safe to attempt
+ * to destroy a locked mutex, and may result in undefined behavior depending
+ * on the platform.
+ *
+ * \param mutex the mutex to destroy
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_CreateMutex
+ * \sa SDL_LockMutex
+ * \sa SDL_TryLockMutex
+ * \sa SDL_UnlockMutex
+ */
+extern DECLSPEC void SDLCALL SDL_DestroyMutex(SDL_mutex * mutex);
+
+/* @} *//* Mutex functions */
+
+
+/**
+ *  \name Semaphore functions
+ */
+/* @{ */
+
+/* The SDL semaphore structure, defined in SDL_syssem.c */
+struct SDL_semaphore;
+typedef struct SDL_semaphore SDL_sem;
+
+/**
+ * Create a semaphore.
+ *
+ * This function creates a new semaphore and initializes it with the value
+ * `initial_value`. Each wait operation on the semaphore will atomically
+ * decrement the semaphore value and potentially block if the semaphore value
+ * is 0. Each post operation will atomically increment the semaphore value and
+ * wake waiting threads and allow them to retry the wait operation.
+ *
+ * \param initial_value the starting value of the semaphore
+ * \returns a new semaphore or NULL on failure; call SDL_GetError() for more
+ *          information.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_DestroySemaphore
+ * \sa SDL_SemPost
+ * \sa SDL_SemTryWait
+ * \sa SDL_SemValue
+ * \sa SDL_SemWait
+ * \sa SDL_SemWaitTimeout
+ */
+extern DECLSPEC SDL_sem *SDLCALL SDL_CreateSemaphore(Uint32 initial_value);
+
+/**
+ * Destroy a semaphore.
+ *
+ * It is not safe to destroy a semaphore if there are threads currently
+ * waiting on it.
+ *
+ * \param sem the semaphore to destroy
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_CreateSemaphore
+ * \sa SDL_SemPost
+ * \sa SDL_SemTryWait
+ * \sa SDL_SemValue
+ * \sa SDL_SemWait
+ * \sa SDL_SemWaitTimeout
+ */
+extern DECLSPEC void SDLCALL SDL_DestroySemaphore(SDL_sem * sem);
+
+/**
+ * Wait until a semaphore has a positive value and then decrements it.
+ *
+ * This function suspends the calling thread until either the semaphore
+ * pointed to by `sem` has a positive value or the call is interrupted by a
+ * signal or error. If the call is successful it will atomically decrement the
+ * semaphore value.
+ *
+ * This function is the equivalent of calling SDL_SemWaitTimeout() with a time
+ * length of `SDL_MUTEX_MAXWAIT`.
+ *
+ * \param sem the semaphore wait on
+ * \returns 0 on success or a negative error code on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_CreateSemaphore
+ * \sa SDL_DestroySemaphore
+ * \sa SDL_SemPost
+ * \sa SDL_SemTryWait
+ * \sa SDL_SemValue
+ * \sa SDL_SemWait
+ * \sa SDL_SemWaitTimeout
+ */
+extern DECLSPEC int SDLCALL SDL_SemWait(SDL_sem * sem);
+
+/**
+ * See if a semaphore has a positive value and decrement it if it does.
+ *
+ * This function checks to see if the semaphore pointed to by `sem` has a
+ * positive value and atomically decrements the semaphore value if it does. If
+ * the semaphore doesn't have a positive value, the function immediately
+ * returns SDL_MUTEX_TIMEDOUT.
+ *
+ * \param sem the semaphore to wait on
+ * \returns 0 if the wait succeeds, `SDL_MUTEX_TIMEDOUT` if the wait would
+ *          block, or a negative error code on failure; call SDL_GetError()
+ *          for more information.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_CreateSemaphore
+ * \sa SDL_DestroySemaphore
+ * \sa SDL_SemPost
+ * \sa SDL_SemValue
+ * \sa SDL_SemWait
+ * \sa SDL_SemWaitTimeout
+ */
+extern DECLSPEC int SDLCALL SDL_SemTryWait(SDL_sem * sem);
+
+/**
+ * Wait until a semaphore has a positive value and then decrements it.
+ *
+ * This function suspends the calling thread until either the semaphore
+ * pointed to by `sem` has a positive value, the call is interrupted by a
+ * signal or error, or the specified time has elapsed. If the call is
+ * successful it will atomically decrement the semaphore value.
+ *
+ * \param sem the semaphore to wait on
+ * \param timeout the length of the timeout, in milliseconds
+ * \returns 0 if the wait succeeds, `SDL_MUTEX_TIMEDOUT` if the wait does not
+ *          succeed in the allotted time, or a negative error code on failure;
+ *          call SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_CreateSemaphore
+ * \sa SDL_DestroySemaphore
+ * \sa SDL_SemPost
+ * \sa SDL_SemTryWait
+ * \sa SDL_SemValue
+ * \sa SDL_SemWait
+ */
+extern DECLSPEC int SDLCALL SDL_SemWaitTimeout(SDL_sem *sem, Uint32 timeout);
+
+/**
+ * Atomically increment a semaphore's value and wake waiting threads.
+ *
+ * \param sem the semaphore to increment
+ * \returns 0 on success or a negative error code on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_CreateSemaphore
+ * \sa SDL_DestroySemaphore
+ * \sa SDL_SemTryWait
+ * \sa SDL_SemValue
+ * \sa SDL_SemWait
+ * \sa SDL_SemWaitTimeout
+ */
+extern DECLSPEC int SDLCALL SDL_SemPost(SDL_sem * sem);
+
+/**
+ * Get the current value of a semaphore.
+ *
+ * \param sem the semaphore to query
+ * \returns the current value of the semaphore.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_CreateSemaphore
+ */
+extern DECLSPEC Uint32 SDLCALL SDL_SemValue(SDL_sem * sem);
+
+/* @} *//* Semaphore functions */
+
+
+/**
+ *  \name Condition variable functions
+ */
+/* @{ */
+
+/* The SDL condition variable structure, defined in SDL_syscond.c */
+struct SDL_cond;
+typedef struct SDL_cond SDL_cond;
+
+/**
+ * Create a condition variable.
+ *
+ * \returns a new condition variable or NULL on failure; call SDL_GetError()
+ *          for more information.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_CondBroadcast
+ * \sa SDL_CondSignal
+ * \sa SDL_CondWait
+ * \sa SDL_CondWaitTimeout
+ * \sa SDL_DestroyCond
+ */
+extern DECLSPEC SDL_cond *SDLCALL SDL_CreateCond(void);
+
+/**
+ * Destroy a condition variable.
+ *
+ * \param cond the condition variable to destroy
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_CondBroadcast
+ * \sa SDL_CondSignal
+ * \sa SDL_CondWait
+ * \sa SDL_CondWaitTimeout
+ * \sa SDL_CreateCond
+ */
+extern DECLSPEC void SDLCALL SDL_DestroyCond(SDL_cond * cond);
+
+/**
+ * Restart one of the threads that are waiting on the condition variable.
+ *
+ * \param cond the condition variable to signal
+ * \returns 0 on success or a negative error code on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_CondBroadcast
+ * \sa SDL_CondWait
+ * \sa SDL_CondWaitTimeout
+ * \sa SDL_CreateCond
+ * \sa SDL_DestroyCond
+ */
+extern DECLSPEC int SDLCALL SDL_CondSignal(SDL_cond * cond);
+
+/**
+ * Restart all threads that are waiting on the condition variable.
+ *
+ * \param cond the condition variable to signal
+ * \returns 0 on success or a negative error code on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_CondSignal
+ * \sa SDL_CondWait
+ * \sa SDL_CondWaitTimeout
+ * \sa SDL_CreateCond
+ * \sa SDL_DestroyCond
+ */
+extern DECLSPEC int SDLCALL SDL_CondBroadcast(SDL_cond * cond);
+
+/**
+ * Wait until a condition variable is signaled.
+ *
+ * This function unlocks the specified `mutex` and waits for another thread to
+ * call SDL_CondSignal() or SDL_CondBroadcast() on the condition variable
+ * `cond`. Once the condition variable is signaled, the mutex is re-locked and
+ * the function returns.
+ *
+ * The mutex must be locked before calling this function.
+ *
+ * This function is the equivalent of calling SDL_CondWaitTimeout() with a
+ * time length of `SDL_MUTEX_MAXWAIT`.
+ *
+ * \param cond the condition variable to wait on
+ * \param mutex the mutex used to coordinate thread access
+ * \returns 0 when it is signaled or a negative error code on failure; call
+ *          SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_CondBroadcast
+ * \sa SDL_CondSignal
+ * \sa SDL_CondWaitTimeout
+ * \sa SDL_CreateCond
+ * \sa SDL_DestroyCond
+ */
+extern DECLSPEC int SDLCALL SDL_CondWait(SDL_cond * cond, SDL_mutex * mutex);
+
+/**
+ * Wait until a condition variable is signaled or a certain time has passed.
+ *
+ * This function unlocks the specified `mutex` and waits for another thread to
+ * call SDL_CondSignal() or SDL_CondBroadcast() on the condition variable
+ * `cond`, or for the specified time to elapse. Once the condition variable is
+ * signaled or the time elapsed, the mutex is re-locked and the function
+ * returns.
+ *
+ * The mutex must be locked before calling this function.
+ *
+ * \param cond the condition variable to wait on
+ * \param mutex the mutex used to coordinate thread access
+ * \param ms the maximum time to wait, in milliseconds, or `SDL_MUTEX_MAXWAIT`
+ *           to wait indefinitely
+ * \returns 0 if the condition variable is signaled, `SDL_MUTEX_TIMEDOUT` if
+ *          the condition is not signaled in the allotted time, or a negative
+ *          error code on failure; call SDL_GetError() for more information.
+ *
+ * \since This function is available since SDL 2.0.0.
+ *
+ * \sa SDL_CondBroadcast
+ * \sa SDL_CondSignal
+ * \sa SDL_CondWait
+ * \sa SDL_CreateCond
+ * \sa SDL_DestroyCond
+ */
+extern DECLSPEC int SDLCALL SDL_CondWaitTimeout(SDL_cond * cond,
+                                                SDL_mutex * mutex, Uint32 ms);
+
+/* @} *//* Condition variable functions */
+
+
+/* Ends C function definitions when using C++ */
+#ifdef __cplusplus
+}
+#endif
+#include "close_code.h"
+
+#endif /* SDL_mutex_h_ */
+
+/* vi: set ts=4 sw=4 expandtab: */